The best way I have found to verify is to look at bandwidth using a network monitoring
tool.
If you see bandwidth utilization stop consistantly at half of what you are supposed to
have. This is a good indicator they are not giving you all of the bandwidth you
thought
you had.
This won't tell you if they gave you more than you asked for...but who cares.
"Sim, CT (Chee Tong)" wrote:
> Hi.. Dear all,
>
> May I know is there a command to check the real bandwidth of the frame relay
> line? I have a frame relay link from Singapore to Jakarta as shown. what is
> mean by BW 64 Kbit, ? They told me it is 128K, CIR 64K, but I cannot tell
> from below.
>
> Sim
>
> Serial0 is up, line protocol is up
> Hardware is PowerQUICC Serial
> Description: --- XNR=57754E DNA=2622024 MTN port=AJKT5-12/5
> MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,
> reliability 255/255, txload 15/255, rxload 7/255
> Encapsulation FRAME-RELAY, loopback not set
> Keepalive set (10 sec)
> LMI enq sent 30201, LMI stat recvd 30202, LMI upd recvd 0, DTE LMI up
> LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0
> LMI DLCI 1023 LMI type is CISCO frame relay DTE
> Broadcast queue 0/64, broadcasts sent/dropped 21916/0, interface
> broadcasts 16853
> Last input 00:00:00, output 00:00:00, output hang never
> Last clearing of "show interface" counters 3d11h
> Input queue: 0/75/0 (size/max/drops); Total output drops: 0
> Queueing strategy: weighted fair
> Output queue: 0/1000/64/0 (size/max total/threshold/drops)
> Conversations 0/18/256 (active/max active/max total)
> Reserved Conversations 0/0 (allocated/max allocated)
> 5 minute input rate 2000 bits/sec, 4 packets/sec
> 5 minute output rate 4000 bits/sec, 4 packets/sec
> 841970 packets input, 340086907 bytes, 0 no buffer
> Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
> 5 input errors, 3 CRC, 0 frame, 0 overrun, 0 ignored, 2 abort
> 848797 packets output, 303003541 bytes, 0 underruns
> 0 output errors, 0 collisions, 4 interface resets
> 0 output buffer failures, 0 output buffers swapped out
> 31 carrier transitions
> DCD=up DSR=up DTR=up RTS=up CTS=up
>
> Serial0.2 is up, line protocol is up
> Hardware is PowerQUICC Serial
> Description: --- To SIN01 ser 1/1.19 ---
> Internet address is 57.200.243.12/30
> MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,
> reliability 255/255, txload 15/255, rxload 7/255
> Encapsulation FRAME-RELAY
> JKT01>
>
> ==================================================================
> De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
> is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
> onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en
> de afzender direct te informeren door het bericht te retourneren.
> ==================================================================
> The information contained in this message may be confidential
> and is intended to be exclusively for the addressee. Should you
> receive this message unintentionally, please do not use the contents
> herein and notify the sender immediately by return e-mail.
>
> ==================================================================
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
