Sim,
I know there was a discussion on this subject a little while ago you may
want to search through the past few weeks messages for one on this subject.
The responses were really good.
>>>Brian
>From: [EMAIL PROTECTED]
>Reply-To: [EMAIL PROTECTED]
>To: "Sim, CT (Chee Tong)" <[EMAIL PROTECTED]>
>CC: [EMAIL PROTECTED]
>Subject: Re: any command to check the bandwidth of frame relay link?
>Date: Wed, 20 Dec 2000 12:42:44 +0000
>
>Hi Sim
> If you are running CISCO frame encap then you can see the bandwidth
>of
>the line with the
>
>SH FRAME-RELAY MAP command
>
>Hope this helps
>
>Dave
>
>
>
>
> "Sim, CT (Chee Tong)"
> <[EMAIL PROTECTED] To:
>[EMAIL PROTECTED]
> obank.com> cc:
> Sent by: Subject: any command
>to check the bandwidth of frame relay link?
> [EMAIL PROTECTED]
>
>
> 12/20/2000 07:04
> Please respond to
> "Sim, CT (Chee Tong)"
>
>
>
>
>
>
>Hi.. Dear all,
>
>May I know is there a command to check the real bandwidth of the frame
>relay
>line? I have a frame relay link from Singapore to Jakarta as shown. what is
>mean by BW 64 Kbit, ? They told me it is 128K, CIR 64K, but I cannot tell
>from below.
>
>Sim
>
>Serial0 is up, line protocol is up
> Hardware is PowerQUICC Serial
> Description: --- XNR=57754E DNA=2622024 MTN port=AJKT5-12/5
> MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,
> reliability 255/255, txload 15/255, rxload 7/255
> Encapsulation FRAME-RELAY, loopback not set
> Keepalive set (10 sec)
> LMI enq sent 30201, LMI stat recvd 30202, LMI upd recvd 0, DTE LMI up
> LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0
> LMI DLCI 1023 LMI type is CISCO frame relay DTE
> Broadcast queue 0/64, broadcasts sent/dropped 21916/0, interface
>broadcasts 16853
> Last input 00:00:00, output 00:00:00, output hang never
> Last clearing of "show interface" counters 3d11h
> Input queue: 0/75/0 (size/max/drops); Total output drops: 0
> Queueing strategy: weighted fair
> Output queue: 0/1000/64/0 (size/max total/threshold/drops)
> Conversations 0/18/256 (active/max active/max total)
> Reserved Conversations 0/0 (allocated/max allocated)
> 5 minute input rate 2000 bits/sec, 4 packets/sec
> 5 minute output rate 4000 bits/sec, 4 packets/sec
> 841970 packets input, 340086907 bytes, 0 no buffer
> Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
> 5 input errors, 3 CRC, 0 frame, 0 overrun, 0 ignored, 2 abort
> 848797 packets output, 303003541 bytes, 0 underruns
> 0 output errors, 0 collisions, 4 interface resets
> 0 output buffer failures, 0 output buffers swapped out
> 31 carrier transitions
> DCD=up DSR=up DTR=up RTS=up CTS=up
>
>Serial0.2 is up, line protocol is up
> Hardware is PowerQUICC Serial
> Description: --- To SIN01 ser 1/1.19 ---
> Internet address is 57.200.243.12/30
> MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,
> reliability 255/255, txload 15/255, rxload 7/255
> Encapsulation FRAME-RELAY
>JKT01>
>
>==================================================================
>De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
>is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
>onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en
>de afzender direct te informeren door het bericht te retourneren.
>==================================================================
>The information contained in this message may be confidential
>and is intended to be exclusively for the addressee. Should you
>receive this message unintentionally, please do not use the contents
>herein and notify the sender immediately by return e-mail.
>
>
>==================================================================
>
>_________________________________
>FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
>_________________________________
>FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]