Hi,
The loopback IP address configured will be the Router ID even if it is less
than the IP address on the active interface.
This is because the loop back interface will not go down as the physical
interface.
Raghavan
At 02:24 PM 12/22/00 +0800, you wrote:
>Hi everybody:
>I am study BSCN,there are something confused me:
>in the book they says:The highest IP address on an active interface is
>normally used as the router ID, but this can be overridden by configuring an
>IP address on a loopback interface.
>I want to know which will be the Router ID if the loopback IP address
>smaller than the active interface IP address?
>Any suggestion will be appreciate,thanks.
>
>Will Guan
>frome Peking, China
>
>
>_________________________________
>FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
