Nope I can guarantee that a 4E with IOS 12.07T supports full-duplex at
least.....
Promise! :)
Darren
On Thu, 28 Dec 2000, Circusnuts wrote:
> You will need somthing that reads "FE" before you can go full-duplex.
>
> Best of Luck
> Phil
>
> ----- Original Message -----
> From: "Darren Ward" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Thursday, December 28, 2000 8:57 AM
> Subject: 3600 Ethernet Question
>
>
> > Hi All,
> >
> > Here's a question for one and all.....
> >
> > A 3640 with a 1E2W running Enterprise IOS 11.3.8 does not have the
> > full-duplex command available for the ethernet.
> >
> > However a different 3640 with a 4E card running IP Plus IOS 12.0.7T does
> > support the full-duplex command on the ethernet ports.
> >
> > The question I have since I can't find it with a search on CCO is if the
> > support for 'full-duplex' is based on the card or the IOS?
> >
> > Darren Ward
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
