hi there ,
this happens maybe ur emulator is not working properly and isnt transmiting
break sequence to the router try reinstalling it or try it with some other
machine.
try break+f5 or shift+f5
or follow this
This is useful if your terminal emulator doesn't support the break key, or
if a bug prevents it from sending the correct signal (the hyperterminal
under Windows NT used to suffer from this behavior):
Connect to the router with the following terminal settings:
1200 baud rate
No parity
8 data bits
1 stop bit
No flow control
You will no longer be able to see any output on your screen. This is normal.
Reload the router and press the spacebar for 10-15 seconds. This generates a
signal similar to the break sequence.
Disconnect your terminal and reconnect with a 9600 baud rate. You should now
be in ROM Monitor mode.
_/-\______'Cheers'________ /_\
\-/ | |
""Paver, Charles"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi all! I am unable to recover my password on my Cisco 1600 router. I
know
> it says to press the break key, but that does not work. OS is Windows nt
> 4.0, Spack 6a. I pressed shift-ctrl-6 as well as break repeatedly during
> the first 10 seconds, but didnt get into rommon mode. Anyone know how to
do
> this?
>
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
