also i keep getting a wait for carrier timeout
this is really confusing me!
> 00:06:54: BRI0: wait for carrier timeout, call
id=0x8028
> >>> beth4235 01/13/01 11:27 >>>
>
> If i do a sh isdn status and get the following:The
> current ISDN Switchtype = basic-ni1
> ISDN BRI0 interface
> Layer 1 Status:
> ACTIVE
> Layer 2 Status:
> TEI = 96, State = MULTIPLE_FRAME_ESTABLISHED
> TEI = 97, State = MULTIPLE_FRAME_ESTABLISHED
> Spid Status:
> TEI 96, ces = 1, state = 5(init)
> spid1 configured, no LDN, spid1 sent,
> spid1 valid
> Endpoint ID Info: epsf = 0, usid = 61,
> tid
> = 1
> TEI 97, ces = 2, state = 5(init)
> spid2 configured, no LDN, spid2 sent,
> spid2 valid
> Endpoint ID Info: epsf = 0, usid = 5,
> tid
> = 1
> Layer 3 Status:
> 0 Active Layer 3 Call(s)
> Activated dsl 0 CCBs = 1
> CCB: callid=0x0, sapi=0, ces=1, B-chan=0
> Total Allocated ISDN CCBs = 1
>
>
> but when i do a show dialer all call attempts show
> FAILURE .... would this point towards problem with
> isdn line??!
>
> please help!
> Beth
>
>
> __________________________________________________
> Do You Yahoo!?
> Get email at your own domain with Yahoo! Mail.
> http://personal.mail.yahoo.com/
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
>
__________________________________________________
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail.
http://personal.mail.yahoo.com/
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
