Below is the show ver of the switch
Cisco Internetwork Operating System Software
IOS (tm) MSFC Software (C6MSFC-IS-M), Version 12.0(7)XE1, EARLY DEPLOYMENT
RELEA
SE SOFTWARE (fc1)
TAC:Home:SW:IOS:Specials for info
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Fri 04-Feb-00 00:28 by lstringr
Image text-base: 0x60008900, data-base: 0x60CBC000
ROM: System Bootstrap, Version 12.0(3)XE, RELEASE SOFTWARE
BOOTFLASH: MSFC Software (C6MSFC-IS-M), Version 12.0(7)XE1, EARLY DEPLOYMENT
REL
EASE SOFTWARE (fc1)
ZA002002 uptime is 6 weeks, 3 days, 7 hours, 17 minutes
System returned to ROM by power-on
Running default software
cisco Cat6k-MSFC (R5000) processor with 122880K/8192K bytes of memory.
Processor board ID SAD0408037F
R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache
Last reset from power-on
Bridging software.
X.25 software, Version 3.0.0.
16 Virtual Ethernet/IEEE 802.3 interface(s)
123K bytes of non-volatile configuration memory.
4096K bytes of packet SRAM memory.
16384K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x102
My problem is that when I try to tracroute to a printer on a vlan it just
gives me the stars , but I can ping quite easily from the same switch.I had
a trace done from the mainframe and it stops at this switch and I had
another mainframe trace done from a mainframe in Europe and it still stops
at this switch.I can ping the printer address and get a 100% reply from both
mainframes.
Any suggestions ?????
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
