traceroute is just a hack using ping and incrementing TTL to force ttl
timeouts.
--
Jason Roysdon, CCNP/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage: http://jason.artoo.net/
Cisco resources: http://r2cisco.artoo.net/
""Tony van Ree"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi,
>
> The printer needs to understand the traceroute packet if not it won't
respond. Ping works because the printer understands the ping command and
sends an echo back.
>
> Just a thought.
>
> Teunis,
> Hobart, Tasmania
> Australia
>
> On Tuesday, January 16, 2001 at 09:20:05 PM, Shane Stockman wrote:
>
> > Below is the show ver of the switch
> >
> > Cisco Internetwork Operating System Software
> > IOS (tm) MSFC Software (C6MSFC-IS-M), Version 12.0(7)XE1, EARLY
DEPLOYMENT
> > RELEA
> > SE SOFTWARE (fc1)
> > TAC:Home:SW:IOS:Specials for info
> > Copyright (c) 1986-2000 by cisco Systems, Inc.
> > Compiled Fri 04-Feb-00 00:28 by lstringr
> > Image text-base: 0x60008900, data-base: 0x60CBC000
> >
> > ROM: System Bootstrap, Version 12.0(3)XE, RELEASE SOFTWARE
> > BOOTFLASH: MSFC Software (C6MSFC-IS-M), Version 12.0(7)XE1, EARLY
DEPLOYMENT
> > REL
> > EASE SOFTWARE (fc1)
> >
> > ZA002002 uptime is 6 weeks, 3 days, 7 hours, 17 minutes
> > System returned to ROM by power-on
> > Running default software
> >
> > cisco Cat6k-MSFC (R5000) processor with 122880K/8192K bytes of memory.
> > Processor board ID SAD0408037F
> > R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache
> > Last reset from power-on
> > Bridging software.
> > X.25 software, Version 3.0.0.
> > 16 Virtual Ethernet/IEEE 802.3 interface(s)
> > 123K bytes of non-volatile configuration memory.
> > 4096K bytes of packet SRAM memory.
> > 16384K bytes of Flash internal SIMM (Sector size 256K).
> > Configuration register is 0x102
> >
> >
> > My problem is that when I try to tracroute to a printer on a vlan it
just
> > gives me the stars , but I can ping quite easily from the same switch.I
had
> > a trace done from the mainframe and it stops at this switch and I had
> > another mainframe trace done from a mainframe in Europe and it still
stops
> > at this switch.I can ping the printer address and get a 100% reply from
both
> > mainframes.
> >
> > Any suggestions ?????
> >
> >
> >
_________________________________________________________________________
> > Get Your Private, Free E-mail from MSN Hotmail at
http://www.hotmail.com.
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
> >
>
>
> --
> www.tasmail.com
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
