If you a using xmodem command, you can follow the step like below:
1. Change console speed of router to the highest speed its supported.
2. After changes the speed, changes your hyperterm speed
to the console's speed.
3. type xmodem -c at the rommon promt of router.
4. clik transfer----> send file, then specify your image
name and location
5. Wait until it transfer all to the router and programmed
to the flash. and after that it will reset
automatically.
I hope that help. Corect me if i am wrong.
Regards,
William
----- Original Message -----
From: Albert Lu <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, January 18, 2001 12:46 AM
Subject: 2500 xmodem flash transfer
> Hi,
>
> Could anyone point me to some info on transfering IOS images to/from a
> 2500?
>
> Thanks
>
> Albert
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
