Look here (watch for wordwrap)
http://www.cisco.com/univercd/cc/td/doc/product/software/ios112/112cg_cr/1cb
ook/1csysim.htm
Setup a TFTP server on a computer, and write down it's IP address.
To save IOS to the TFTP server, type: copy flash tftp
To load IOS from the TFTP server, type: copy tftp flash
A good idea would be to also save your configuration:
The configuration the router has when it starts up:
copy star tftp
The configuration the router has right now if different from the startup:
copy run tftp
Hth,
Ole
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Ole Drews Jensen
Systems Network Manager
CCNA, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
http://www.CiscoKing.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NEED A JOB ???
http://www.oledrews.com/job
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----Original Message-----
From: Albert Lu [mailto:[EMAIL PROTECTED]]
Sent: Thursday, January 18, 2001 2:47 AM
To: [EMAIL PROTECTED]
Subject: 2500 xmodem flash transfer
Hi,
Could anyone point me to some info on transfering IOS images to/from a
2500?
Thanks
Albert
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
