> >
> > If a RIF goes through 1rtr with an id of 0191 and
> > then rtr2 which has an id
> > of 0191. Since the ids are the same would this not
> > be an incorrect
> > configuration
It would not be an incorrect configuration. Per the source-route bridging
standard (IEEE 802.1d Annex C) what needs to be unique is
ring#/bridge#/ring#. You can use the same bridge number on two bridges
(routers) if those bridges aren't connecting the same rings.
Priscilla
________________________
Priscilla Oppenheimer
http://www.priscilla.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]