Try a fully loaded 6509 with both power supplies. Needless to say, I'd
recommend keeping the static bags hand to unload this thing before trying to
get it into the rack, or at least yank both power supplies.
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage: http://jason.artoo.net/
Cisco resources: http://r2cisco.artoo.net/
"sam adams" <[EMAIL PROTECTED]> wrote in message
000201c08294$3c7e8870$075901c0@meanboy4">news:000201c08294$3c7e8870$075901c0@meanboy4...
> I think the Cat 5K is just a little to heavy for the back.
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Ole Drews Jensen
> Sent: Friday, January 19, 2001 8:22 AM
> To: 'Albert Lu'
> Cc: [EMAIL PROTECTED]; Mask Of Zorro
> Subject: RE: Routers in my lab
>
>
> What excactly you need or not, depends on what you want to study for next,
> and what you would like to practise. If you wish to work with Token Ring,
> you would need to get either a fixed router that has a build-in Token Ring
> interface, or a modular router where you can get a Token Ring WIC to
insert.
> You would then also need a MAU (or MSAU as they are called in Microsoft
> Study Guides) and one or two Token Ring NIC's so you could play around
with
> it.
>
> Noone can answer your question better than yourself. Draw what you
> need/would like on a piece of paper, and then look at the products
available
> on http://www.cisco.com
>
> Hth,
>
> Ole
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Ole Drews Jensen
> Systems Network Manager
> CCNA, MCSE, MCP+I
> RWR Enterprises, Inc.
> [EMAIL PROTECTED]
> http://www.CiscoKing.com
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> NEED A JOB ???
> http://www.oledrews.com/job
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
>
>
> -----Original Message-----
> From: Albert Lu [mailto:[EMAIL PROTECTED]]
> Sent: Friday, January 19, 2001 10:29 AM
> To: Ole Drews Jensen
> Cc: [EMAIL PROTECTED]; Mask Of Zorro
> Subject: Re: Routers in my lab
>
>
> I'm thinking of getting rid of
>
> 1x2503
> 2x2610
> 1x2502
> 1x2504
>
> And using that money to get Cat5000 and ISDN simulator. I'm also
> considering a couple of 2513, do I really need 2513 if so do I need 2 or
> can I go with 1?
>
> I know people who's done CCIE with just 6-7 routers, I'm not sure how I
can
> make use of more than that either.
>
> BTW. My aim is to be able to do most of the CCBootcamp labs.
>
> ----------
> > From: Ole Drews Jensen <[EMAIL PROTECTED]>
> > To: 'Albert Lu' <[EMAIL PROTECTED]>; [EMAIL PROTECTED]
> > Subject: RE: Routers in my lab
> > Date: Saturday, January 20, 2001 2:45 AM
> >
> > I would keep them all unless you're in acute need of money. Even though
> I'm
> > many frequent flyer miles away from the CCIE, I do believe that you can
> not
> > have to much equipment to practice on.
> >
> > If it were for the CCNA only, 1,2 or 3 2500's should be plenty.
> >
> > You might want to get rid of a some of the 2500's and get different
> routers
> > instead, plus a switch or two. You can keep buying stuff from now to
> > Christmas, the only thing that stops you are the amount of money you can
> > afford to spend on this.
> >
> > If I was a multi-millionaire and for some reason still wanted to study
> for
> > these Cisco tests, I would buy every model they have ever made and setup
> a
> > whole house as a lab.
> >
> > But, I'm not, so I currently only have four 2500's to play with, but
> that's
> > kind of okay for now. I would have liked a Cat5000, but that's a little
> too
> > heavy for my wallet.
> >
> > Hth,
> >
> > Ole
> >
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > Ole Drews Jensen
> > Systems Network Manager
> > CCNA, MCSE, MCP+I
> > RWR Enterprises, Inc.
> > [EMAIL PROTECTED]
> > http://www.CiscoKing.com
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > NEED A JOB ???
> > http://www.oledrews.com/job
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> >
> >
> > -----Original Message-----
> > From: Albert Lu [mailto:[EMAIL PROTECTED]]
> > Sent: Friday, January 19, 2001 9:37 AM
> > To: [EMAIL PROTECTED]
> > Subject: Routers in my lab
> >
> >
> > Hi all,
> >
> > Take a look at what I've got in my lab consisting of 12 routers.
> >
> > 3x2503
> > 2511
> > 2501
> > 2521
> > 2502
> > 2504
> > 2x2610
> > 2x2620
> >
> > Have I over done it? Are there scenarios in the CCIE that may need all
> > this? What should I keep what should I get rid of?
> >
> > Thanks
> >
> > Albert
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
