Is it safe to assume you were running all of these software verions 12.08T?
That could be your problem.....I have 3 3640's and 1 3660 running 12.1(2)T
and it runs fine using VOIP....just my .02...good luck


Thanks,

Chris Boyd, CCNA
Network Support
828.323.4103
Alex Lee, Inc.
120 4th St SW
Hickory, NC 28602
www.alexlee.com
----- Original Message -----
From: "Mustafa Kemal Furat" <[EMAIL PROTECTED]>
To: "Edmund Woltynski" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>;
<[EMAIL PROTECTED]>
Sent: Friday, February 02, 2001 7:37 AM
Subject: RE: CVoice problem....


> NO ...
> I tried it too...
>
> -----Original Message-----
> From: Edmund Woltynski [mailto:[EMAIL PROTECTED]]
> Sent: Friday, February 02, 2001 1:53 PM
> To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
> Subject: Re: CVoice problem....
>
>
> Check your IOS versions - the earlier versions were buggy (we had the same
> problem with
> < 12.05) - I seem to recall something along the lines of ver 12.05XK or
> 12.0(7)XK- was
> the minimum spec. The latest IOS 12.1 IP Plus works just fine. Check CCO.
>
> Andrew Larkins wrote:
>
> > We had the same problem here - all configs the same, but a dial is
> garbled.
> > The only solution was to upgrade the software to the same version
> >
> > -----Original Message-----
> > From: Mustafa Kemal Furat [mailto:[EMAIL PROTECTED]]
> > Sent: 01 February 2001 14:44
> > To: [EMAIL PROTECTED]
> > Subject: CVoice problem....
> >
> > Hello,
> > Help!...  I have a problem
> > One of our  customer using
> >
> > 2600 (IOS (tm) C2600 Software (C2600-IS-M), Version 12.0(2a), RELEASE
> > SOFTWARE (fc1) series
> > FXS and FXO voice cards
> > and
> >
> > 3640 IOS (tm) 3600 Software (C3640-IS-M), Version 12.0(8), RELEASE
> SOFTWARE
> > (fc1)
> > E&M voice cards
> >
> > on their WAN and running VoIP, We replaced the 3640 with a
> >
> > 3660     IOS (tm) 3600 Software (C3640-IS-M), Version 12.0(8), RELEASE
> > SOFTWARE (fc1)
> > FXS voice cards
> >
> > Now we have voice problem. Whenever we try to place a call we hear only
> some
> > strange noises....
> >
> > Do you know the reason?... or can we solve it?... (Any solution other
than
> > IOS upgrade will be highly appriciated)
> >
> > Thanx
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> --
>
> ------------------------------------------------------
> Regards
>   Edmund Woltynski
>
>    Ph: 08 83711492
>    Fax: 08 82971774
>    Mobile: 0414841704
>    Email: [EMAIL PROTECTED]
>    PSCS  web: http://www.pscs.com.au
>    48 Spring Street
>    NORTH PLYMPTON 5037
>   State: South Australia
>   Country: Australia
> ___________________________
> The information transmitted by the following e-mail is intended only for
> the addressee and may contain confidential and/or privileged material.
> Any interception, review, retransmission, dissemination, or other use
> of, or taking of any action upon this information by persons or entities
> other than the intended recipient is prohibited by law and may subject
> them to criminal or civil liability. If you received this communication
> in error, please contact us immediately at (618) 83711492, and delete
> the communication from any computer or network system.
> -------------------------------------------------
>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to