At least on a 7513 RSP4 running this particular IOS, "reset" is not a valid
command.
RCORP#reset ?         
% Unrecognized command
RCORP#res?            
resume                

RCORP#

>  reset line 3
>  
>  -----Original Message-----
>  From: John Neiberger [mailto:[EMAIL PROTECTED]]
>  Sent: Thursday, February 01, 2001 7:33 PM
>  To: [EMAIL PROTECTED]
>  Subject: Odd CLI behavior in 12.1(5a)E1
>  
>  
>  I'm trying to clear a line that is hung for some reason:
>  
>  RCORP#sho users  
>      Line       User       Host(s)              Idle       Location 
>  *  2 vty 0                idle                 00:00:00 10.1.100.180
>     3 vty 1                rdnvr                04:24:08 10.1.100.171
>     5 vty 3                idle                 00:00:00 10.1.100.171
>            
>    Interface  User      Mode                     Idle Peer Address
>  
>  RCORP#clear line 3
>  % Ambiguous command:  "clear line 3" 
>  RCORP#clear line?
>  line  linecard
>  RCORP#clear line ?
>  % Ambiguous command:  "clear line "  
>  
>  Why is it not recognizing this command?  I'm also noticing it when trying
to
>  turn on cef accounting.
>  
>  First, to prove we have ip cef running:
>  RCORP#sho ip cef
>  Prefix              Next Hop             Interface
>  0.0.0.0/0           10.1.120.75          Ethernet0/2
>  0.0.0.0/32          receive
>  10.1.100.0/24       attached             FastEthernet3/0
>  10.1.100.0/32       receive
>  10.1.100.1/32       10.1.100.1           FastEthernet3/0
>  
>  RCORP#conf t                                                 
>  Enter configuration commands, one per line.  End with CNTL/Z.
>  RCORP(config)#ip cef ?
>  % Ambiguous command:  "ip cef "
>  RCORP(config)#ip cef accounting ?
>  % Ambiguous command:  "ip cef accounting "
>  RCORP(config)#ip cef ?
>  % Ambiguous command:  "ip cef "
>  RCORP(config)#ip cef
>  RCORP(config)#                                               
>  
>  Personally, this is spooky.  I hope this is fixed in 12.2T, or one day I
>  might see this:
>  
>  RCORP#conf t
>  % Amgiguous command: "conf t"
>  
>  
>  
>  
>  
>  _______________________________________________________
>  Send a cool gift with your E-Card
>  http://www.bluemountain.com/giftcenter/
>  
>  
>  _________________________________
>  FAQ, list archives, and subscription info:
>  http://www.groupstudy.com/list/cisco.html
>  Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>





_______________________________________________________
Send a cool gift with your E-Card
http://www.bluemountain.com/giftcenter/


_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to