well........ I've been having a running commentary with Cisco for the last
few days about what is and what isn't supported on 2600s..........
If all you need is an additional ethernet then the NM-1E= would do it.
There is also a 4 port ethernet - NM-4E= (but pricey)
Kevin Wigle
----- Original Message -----
From: "Evan Francen" <[EMAIL PROTECTED]>
To: "'Warrick FitzGerald'" <[EMAIL PROTECTED]>;
<[EMAIL PROTECTED]>
Sent: Tuesday, February 06, 2001 10:14 AM
Subject: RE: NM-1E2W Module
> The 2600 series routers do not support the NM-1E2W module. You can check
> the supported modules at
> http://www.cisco.com/univercd/cc/td/doc/pcat/2600.htm.
>
> HTH,
> Evan
>
> -----Original Message-----
> From: Warrick FitzGerald [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, February 06, 2001 9:03 AM
> To: [EMAIL PROTECTED]
> Subject: NM-1E2W Module
>
>
> Hi,
>
> I have a 2600 cisco router and would like to purchase another ethernet
> interface for the unit. I can find plety of NM-1E2W modules for sale, but
> the description next to the item always says that it is for a 3600 router,
> can anyone tell me if this module will work in a 2600 and if so how would
I
> have figured this out myself ?
>
> Thanks
> Warrick FitzGerald
> LiveTechnology International Inc.
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
