Mr. Wigle,
I couldn't help but notice your frustration with this topic. Here is a
link that should be of service to you:
http://www.cisco.com/pcgi-bin/finder/msbsearch.pl
This link is the "Solution Finder for Modular Routers"
You would be best served by doing the "Search 2" by part number. Plug your
part number in, and you will find what routers support that particular part
number.
Hope this is of help to you and everyone else on this mailing list.
Chris Best
Cisco Systems
Partner/Reseller Presales Helpline
1-800-553-6387, option 2 or
+1-408-526-7208, option 2
http://www.cisco.com/go/tools
----- Original Message -----
From: "Kevin Wigle" <[EMAIL PROTECTED]>
To: "Jon Wagner" <[EMAIL PROTECTED]>; "'Warrick FitzGerald'"
<[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Tuesday, February 06, 2001 10:10 AM
Subject: Re: NM-1E2W Module
> this is what I get:
>
> As this page was linked to Cisco CCO from another web site -
>
>
> Unknown referrer
> you should notify the [EMAIL PROTECTED]
> or similar responsible person for the content or search feature of that
> site,
> of the incorrect link to http://www.cisco.com/go/modules
>
> Kevin Wigle
>
>
> ----- Original Message -----
> From: "Jon Wagner" <[EMAIL PROTECTED]>
> To: "'Warrick FitzGerald'" <[EMAIL PROTECTED]>;
> <[EMAIL PROTECTED]>
> Sent: Tuesday, February 06, 2001 12:17 PM
> Subject: RE: NM-1E2W Module
>
>
> > For a complete list of every module and it's requirements, you can find
> out
> > at
> > http://www.cisco.com/go/modules
> >
> > Every module is listed under 'solution finder' and it contains hardware
&
> > software requirements for each module.
> >
> > -----Original Message-----
> > From: Kevin Wigle [mailto:[EMAIL PROTECTED]]
> > Sent: Tuesday, February 06, 2001 11:55 AM
> > To: Evan Francen; 'Warrick FitzGerald'; [EMAIL PROTECTED]
> > Subject: Re: NM-1E2W Module
> >
> >
> > well........ I've been having a running commentary with Cisco for the
last
> > few days about what is and what isn't supported on 2600s..........
> >
> > If all you need is an additional ethernet then the NM-1E= would do it.
> >
> > There is also a 4 port ethernet - NM-4E= (but pricey)
> >
> > Kevin Wigle
> >
> >
> > ----- Original Message -----
> > From: "Evan Francen" <[EMAIL PROTECTED]>
> > To: "'Warrick FitzGerald'" <[EMAIL PROTECTED]>;
> > <[EMAIL PROTECTED]>
> > Sent: Tuesday, February 06, 2001 10:14 AM
> > Subject: RE: NM-1E2W Module
> >
> >
> > > The 2600 series routers do not support the NM-1E2W module. You can
> check
> > > the supported modules at
> > > http://www.cisco.com/univercd/cc/td/doc/pcat/2600.htm.
> > >
> > > HTH,
> > > Evan
> > >
> > > -----Original Message-----
> > > From: Warrick FitzGerald [mailto:[EMAIL PROTECTED]]
> > > Sent: Tuesday, February 06, 2001 9:03 AM
> > > To: [EMAIL PROTECTED]
> > > Subject: NM-1E2W Module
> > >
> > >
> > > Hi,
> > >
> > > I have a 2600 cisco router and would like to purchase another ethernet
> > > interface for the unit. I can find plety of NM-1E2W modules for sale,
> but
> > > the description next to the item always says that it is for a 3600
> router,
> > > can anyone tell me if this module will work in a 2600 and if so how
> would
> > I
> > > have figured this out myself ?
> > >
> > > Thanks
> > > Warrick FitzGerald
> > > LiveTechnology International Inc.
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
