The ROM version of 3.3 catches my eye. Might be good to update those. Call
the TAC. They will provide them for shipping cost.
> -----Original Message-----
> From: Cisco Engineer [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, February 07, 2001 8:28 AM
> To: [EMAIL PROTECTED]
> Subject: Strange problem with Cisco 2501 routers
>
>
>
> Hi Folks,
>
> I have a few Cisco 2501 routers all eith the same
> startup problem. On startup, the routers behave
> normal, but after the "Press RETURN to get started"
> message, the routers come up with errors about the
> ethernet and serial interfaces, restarts and then hang
> up completely.
>
> Thinking that the problem may be with the DRAM, Flash
> or software, I have replaced these with ones from
> other Cisco 2501 routers in good working condition,
> but the problem remained the same. The typical output
> from these routers is as shown at the end of this
> posting.
>
> Any good ideas will be appreciated.
>
> Thank you.
>
>
>
>
> System Bootstrap, Version (3.3), SOFTWARE
> Copyright (c) 1986-1993 by cisco Systems
> 2500 processor with 4096 Kbytes of main memory
>
> Unknown or ambiguous service arg - udp-small-servers
> Unknown or ambiguous service arg - tcp-small-servers
> Illegal IP keyword - classless
> Booting ie11170n from Flash address space
> F3: 3731220+95304+191716 at 0x3000060
>
> Restricted Rights Legend
>
> Use, duplication, or disclosure by the Government is
> subject to restrictions as set forth in subparagraph
> (c) of the Commercial Computer Software - Restricted
> Rights clause at FAR sec. 52.227-19 and subparagraph
> (c) (1) (ii) of the Rights in Technical Data and
> Computer
> Software clause at DFARS sec. 252.227-7013.
>
> cisco Systems, Inc.
> 170 West Tasman Drive
> San Jose, California 95134-1706
>
>
>
> Cisco Internetwork Operating System Software
> IOS (tm) 3000 Software (IGS-I-L), Version 11.1(7),
> RELEASE SOFTWARE (fc2)
> Copyright (c) 1986-1996 by cisco Systems, Inc.
> Compiled Wed 23-Oct-96 20:37 by tej
> Image text-base: 0x0301FC14, data-base: 0x00001000
>
> cisco 2500 (68030) processor (revision A) with
> 4096K/2048K bytes of memory.
> Processor board ID 01091217, with hardware revision
> 00000000
> Bridging software.
> X.25 software, Version 2.0, NET2, BFE and GOSIP
> compliant.
> 1 Ethernet/IEEE 802.3 interface.
> 2 Serial network interfaces.
> 32K bytes of non-volatile configuration memory.
> 4096K bytes of processor board System flash (Read
> ONLY)
>
>
>
> Press RETURN to get started!
>
>
> %LINEPROTO-5-UPDOWN: Line protocol on Interface
> Ethernet0, changed state to down
>
> %LINEPROTO-5-UPDOWN: Line protocol on Interface
> Serial0, changed state to down
> %LINEPROTO-5-UPDOWN: Line protocol on Interface
> Serial1, changed state to down
> %LINK-3-UPDOWN: Interface Ethernet0, changed state to
> up
> %LINK-3-UPDOWN: Interface Serial0, changed state to
> down
> %LINK-3-UPDOWN: Interface Serial1, changed state to
> down
> %SYS-5-CONFIG_I: Configured from memory by console
> %SYS-5-RESTART: System restarted --
> Cisco Internetwork Operating System Software
> IOS (tm) 3000 Software (IGS-I-L), Version 11.1(7),
> RELEASE SOFTWARE (fc2)
> Copyright (c) 1986-1996 by cisco Systems, Inc.
> Compiled Wed 23-Oct-96 20:37 by tej
> %LINK-5-CHANGED: Interface Serial1, changed state to
> administratively down
>
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Auctions - Buy the things you want at great prices.
> http://auctions.yahoo.com/
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct
> and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
