I have two Catalyst 6500's, each with an RSM in module 15 and module 16.
The RSM in module 15 is configured, but the module in 16 is not. The two
Catalyst 6500's have a couple VLAN's which are trunked together with ISL,
and we are doing HSRP between the RSM's in module 15. If one of the
Catalyst's died or if there was a problem with one of the RSM's, the traffic
would route through the other Catalyst that is still up.
Here is my question...We want to utilize the RSM's sitting in module 16 on
each of the switches, and add even more redundancy to the site. Is there a
way to configure the RSM's so if one module died, the other one would pick
up in its place, while also keeping the HSRP running between to two seperate
switches as well?
Any ideas would be a great help, or if you have a link on Cisco's site that
handles this situation.
Thanks-
Glenn Allison, CCNP, CCDA, MCSE
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
