While I've never tried this, it should be a matter of putting both ports in
the same VLAN and then doing a set port channel <mod>/<port-port> on. There
should be no need to trunk the ports so the matter of dot1q vrs ISL is a
non-issue.
Moahzam Durrani wrote in message ...
>
>we have installed the Compaq NC-3134 Nics on one of our new servers. Thse
>Nics have a dual ethernet ports on the card for ALB (automatic load
>balancing) and they support fast etherchannel . Has any one created a
> fast ether channel between a switch (6509) and a server. I have created a
>faste channel trunk between switches , is it the same concept when creating
>between switch and NICS. If any one has used the NC 3134 , Do they support
>dot1q , isl or bothe?? there is hardly any info on compaqs sight.
>Mo Durrani
>IS&T
>WYSE\EDS
>phone:408-473 1246
>[EMAIL PROTECTED]
>[EMAIL PROTECTED]
>
>
>_________________________________
>FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
