This is by design for security reasons. The insecure solution is to provide
a conduit for telnet to a terminal server device on the inside (i.e. router,
switch, something that can accept telnet and then allow you to telnet from
the device), and once telnetted to it, telnet to the inside interface of the
PIX.
The more secure solution would be to have a SSH2 server on the inside for a
secure connection through the PIX, and then SSH to the PIX (or telnet from
the SSH2 server if the inside is fully trusted).
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage: http://jason.artoo.net/
Cisco resources: http://r2cisco.artoo.net/
"Jim Bond" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hello,
>
> I've got a 3640 router and PIX, running IPSec in
> between. Everything works fine except I can't telnet
> from 3640 to PIX outside interface. Any idea?
>
> Thanks in advance.
>
>
> Jim
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Get personalized email addresses from Yahoo! Mail - only $35
> a year! http://personal.mail.yahoo.com/
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
