John,
You can try to reverse telnet from your router's AUX port to the
console port of the Pix.
Step 1: find out the tty# of your AUX port on the router ( sh line aux 0
)
It is probably tty #1 ( on my 2620 it was tty#4 because it has 4 serial
port 0-3 making AUX 0 tty #4)
Step 2: Verify the AUX port on the router has the same baudrate,
Stopbits, and so on as the console
port of the PIX
Step 3: Using a standard Cisco Console Rollover cable connect the Aux of
Router to Console of PIX.
Step 4: Telnet into the IP address of the router using TCP Port 200x
where x=the tty# of the AUX port of router.
(ie telnet 192.168.10.1:2004). I did this internally in my lab and it
works, but when I get to work on Tuesday,I will
verify it works externally, with our external router /PIX.
I hope this helps
Bill
-----Original Message-----
From: Jim Bond [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, February 13, 2001 7:02 PM
To: [EMAIL PROTECTED]
Subject: Telnet to PIX outside interface
Hello,
I've got a 3640 router and PIX, running IPSec in
between. Everything works fine except I can't telnet
from 3640 to PIX outside interface. Any idea?
Thanks in advance.
Jim
__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail - only $35
a year! http://personal.mail.yahoo.com/
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
