This will probably help:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/np1_r
/1rprt1/1reigrp.htm#xtocid135027
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
suaveguru
Sent: Sunday, 18 February 2001 5:46 PM
To: Russell Lusignan; [EMAIL PROTECTED]
Subject: Re: IGRP to EIGRP conversion #2
sorry mind if I ask what is the command to change
default admin dist of a routing protocol
regards,
suaveguru
--- Russell Lusignan <[EMAIL PROTECTED]> wrote:
> Enable EIGRP on the routers and add the network
> statements as you normally
> would.. raise the administrative distance of EIGRP
> to 110, I believe IGRP
> is 100 so even though both routing protocols are
> running on every router,
> EIGRP routes will be rejected because IGRP has a
> lower admin distance..
> Once the routers are ready, simply put the admin
> distance of EIGRP back to
> 90 and it should converge within a few mins.. Once
> the network is using
> only EIGRP learned routes, remote IGRP off the
> routers.
>
> hope that helps
> Russ..
>
>
> ""Roberts, Timothy"" <[EMAIL PROTECTED]>
> wrote in message
>
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> >
> > I have a hub site with 5 remote sites connecting
> to it via frame relay.
> > They are all running IGRP with the same AS. What
> would be the best way to
> > migrate from IGRP to EIGRP? Starting by enabling
> EIGRP on the core router
> > and run both IGRP and EIGRP. Then convert the
> spokes one by one. Then
> > remove IGRP from the core. Can I just enable
> EIGRP on the remotes, allow
> > some time to propagate routes in to the table, and
> then disable IGRP? The
> > people up stairs will not allow for any
> significant down time.
> > Thanks
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
> >
>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail - only $35
a year! http://personal.mail.yahoo.com/
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]