I figured it out, the Cisco 1005 is not capable of being a DCE, so I just
switched the cable around and it works now..thanks for your help!
""CiScO"" <[EMAIL PROTECTED]> wrote in message
96nvg4$psa$[EMAIL PROTECTED]">news:96nvg4$psa$[EMAIL PROTECTED]...
> I've already done that, but when I do sho run on the DCE router it doesn't
> show the clock rate in the config.....whats going on?
>
>
> "John Neiberger" <[EMAIL PROTECTED]> wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > I believe the cause of your problem is that you are using the bandwidth
> > statement instead of the clock rate statement. The bandwidth statement
> has
> > no effect on physical layer clocking, it only makes adjustments to
routing
> > protocol metric calculations.
> >
> > To make this behave correctly, add "clockrate 64000" to the DCE side.
If
> > that doesn't work, let us know.
> >
> > HTH,
> > John
> >
> > > I can't seem to bring up the protocol on my 2 routers. A 2503 (DTE)
> and
> > a
> > > 1005(DCE w/ clockrate of 64000) connected via crossover serial. Here
> are
> > the
> > > serial interfaces configs..
> > >
> > > Cisco 1005
> > > interface Serail0
> > > ip address 192.0.0.2 255.255.255.0
> > > encap ppp
> > > bandwidth 64
> > >
> > >
> > >
> > > Cisco 2503
> > > interface Serial0
> > > ip address 192.0.0.1 255.255.255.0
> > > encap ppp
> > > bandwidth 64
> > >
> > >
> > >
> > > _________________________________
> > > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
> >
> >
> >
> >
> >
> > _______________________________________________________
> > Send a cool gift with your E-Card
> > http://www.bluemountain.com/giftcenter/
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
