Dear all,
I did a show port conter command in my catalyst 5505 switches and result as
below. Can I verify with you that whether the below is correct or not?
1) many Align-Err-FCS-Err counter mean the quality of the cable not good?
2) many Single/Multi/Late- mean the duplex type not match?
3)What is the problem if I got many "Runts" and " Giant" counter?
4)If I got many these port error, will it slow down the whole network or
just the PC attached to the port?
Port Align-Err FCS-Err Xmit-Err Rcv-Err UnderSize
----- ---------- ---------- ---------- ---------- ---------
1/1 0 0 0 0 0
1/2 0 0 0 0 0
3/1 0 0 0 0 0
3/2 0 0 0 0 0
3/3 0 0 0 0 0
3/4 0 0 0 0 0
3/5 0 3119 0 0 0
3/6 57 49 0 0 0
3/7 14189 14295 0 0 0
3/8 13578 12992 0 0 0
Port Single-Col Multi-Coll Late-Coll Excess-Col Carri-Sen Runts Giants
----- ---------- ---------- ---------- ---------- --------- ---------
---------
1/1 0 0 0 0 0 0
0
1/2 0 0 0 0 0 0
0
3/1 0 0 0 0 0 0
-
3/2 0 0 0 0 0 0
-
3/3 0 0 0 0 0 0
-
3/4 0 0 0 0 0 0
-
3/5 0 0 0 0 0 996
0
3/6 0 0 0 0 0 7
0
3/7 0 0 0 0 0 509
0
3/8 0 0 0 0 0 733
0
==================================================================
De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en
de afzender direct te informeren door het bericht te retourneren.
==================================================================
The information contained in this message may be confidential
and is intended to be exclusively for the addressee. Should you
receive this message unintentionally, please do not use the contents
herein and notify the sender immediately by return e-mail.
==================================================================
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
