Hi all,
Our Cisco 3640 router at the DRP site crashed. Router was in "rommon1>" when
I got there. By pressing "i", the router rebooted and came up fine.
The output of the show ver is below. What does the error message mean - does
it (PC 0x603503CC) point to a specific cause..?????
ROM: System Bootstrap, Version 11.1(7)AX [kuong (7)AX], EARLY DEPLOYMENT
RELEASE SOFTWARE (fc2)
xxxxxx uptime is 48 minutes
System returned to ROM by error - a Software forced crash, PC 0x603503CC
System image file is "flash:c3640-ds-mz.121-5a.bin"
cisco 3640 (R4700) processor (revision 0x00) with 60416K/5120K bytes of
memory.
Processor board ID 06014488
R4700 CPU at 100Mhz, Implementation 33, Rev 1.0
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
Basic Rate ISDN software, Version 1.1.
2 Ethernet/IEEE 802.3 interface(s)
2 Token Ring/IEEE 802.5 interface(s)
4 Serial network interface(s)
8 Low-speed serial(sync/async) network interface(s)
4 ISDN Basic Rate interface(s)
DRAM configuration is 64 bits wide with parity disabled.
125K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Thanks
Andrew Larkins
BCom, CCNA, CCDA
Bytes Technology Group
Tel: +2711 800-9300
Fax: +2711 800-9496
Cell: +2783-656-7214
Email: [EMAIL PROTECTED]
OR [EMAIL PROTECTED]
"This message may contain information which is confidential and subject to
legal privilege. If you are not the intended recipient, you may not peruse,
use, disseminate, distribute or copy this message. If you have received
this message in error, please notify the sender immediately by email,
facsimile or telephone and return and/or destroy the original message."
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
