Show ver is below as well as show stack
SAFCOVER>sh stack
Minimum process stacks:
Free/Size Name
5504/6000 IPX Router Init
5584/6000 Call Management
11388/12000 Router Init
9356/12000 Init
5300/6000 RADIUS INITCONFIG
2464/3000 IP Gratuitous ARP
8040/9000 DHCP Client
4576/6000 RSRB Connector
9968/12000 Exec
9776/12000 Virtual Exec
5160/6000 TCP Echo
Interrupt level stacks:
Level Called Unused/Size Name
1 584366 7412/9000 Network interfaces
2 121709 8596/9000 DMA/Timer Interrupt
3 0 9000/9000 PA Management Int Handler
4 3446 8544/9000 Console Uart
5 0 9000/9000 External Interrupt
7 2432493 8604/9000 NMI Interrupt Handler
System was restarted by error - a Software forced crash, PC 0x603503CC
3600 Software (C3640-DS-M), Version 12.1(5a), RELEASE SOFTWARE (fc1)
Compiled Thu 16-Nov-00 18:23 by cmong (current version)
Image text-base: 0x60008940, data-base: 0x60F8C000
Stack trace from system failure:
FP: 0x61D70718, RA: 0x603503CC
FP: 0x61D70718, RA: 0x6034E880
FP: 0x61D70730, RA: 0x60332D6C
FP: 0x61D70768, RA: 0x606CF370
FP: 0x61D70790, RA: 0x606CF468
FP: 0x61D707B8, RA: 0x606D6B78
FP: 0x61D70808, RA: 0x606C7BA0
FP: 0x61D70820, RA: 0x606C8964
SAFCOVER>
-----Original Message-----
From: Peter Ching [mailto:[EMAIL PROTECTED]]
Sent: 19 February 2001 12:56
To: [EMAIL PROTECTED]
Subject: RE: Router crash - what does output mean
I think you'll need to open a Cisco TAC case for this one,
but send the 'show stack' and 'show version'
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Andrew Larkins
Sent: Monday, 19 February 2001 8:33 PM
To: Cisco Mail List
Subject: Router crash - what does output mean
Importance: High
Hi all,
Our Cisco 3640 router at the DRP site crashed. Router was in "rommon1>" when
I got there. By pressing "i", the router rebooted and came up fine.
The output of the show ver is below. What does the error message mean - does
it (PC 0x603503CC) point to a specific cause..?????
ROM: System Bootstrap, Version 11.1(7)AX [kuong (7)AX], EARLY DEPLOYMENT
RELEASE SOFTWARE (fc2)
xxxxxx uptime is 48 minutes
System returned to ROM by error - a Software forced crash, PC 0x603503CC
System image file is "flash:c3640-ds-mz.121-5a.bin"
cisco 3640 (R4700) processor (revision 0x00) with 60416K/5120K bytes of
memory.
Processor board ID 06014488
R4700 CPU at 100Mhz, Implementation 33, Rev 1.0
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
Basic Rate ISDN software, Version 1.1.
2 Ethernet/IEEE 802.3 interface(s)
2 Token Ring/IEEE 802.5 interface(s)
4 Serial network interface(s)
8 Low-speed serial(sync/async) network interface(s)
4 ISDN Basic Rate interface(s)
DRAM configuration is 64 bits wide with parity disabled.
125K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Thanks
Andrew Larkins
BCom, CCNA, CCDA
Bytes Technology Group
Tel: +2711 800-9300
Fax: +2711 800-9496
Cell: +2783-656-7214
Email: [EMAIL PROTECTED]
OR [EMAIL PROTECTED]
"This message may contain information which is confidential and subject to
legal privilege. If you are not the intended recipient, you may not peruse,
use, disseminate, distribute or copy this message. If you have received
this message in error, please notify the sender immediately by email,
facsimile or telephone and return and/or destroy the original message."
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]