Not knowing much about your firewall - is the async port available? i.e. -
does another process have the async open?
If the port is disabled or "occupied" by another program it won't be
available to the terminal server.
Just like the router console port. If you reverse telnet into it, then give
a "ctrl-shift-6-x" to return to the terminal server, that console port is
still attached to a session. If you try a second reverse telnet into the
router console you will get the same error until the first sessioin is
released.
And, like on my PC, if I don't turn off the Palm III Hotsysnc monitor I
can't use com1: to connect to a router port. (until I remember to turn it
off)
Kevin Wigle
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, February 19, 2001 9:28 AM
Subject: % Connection refused by remote host
> Hi,
>
> I'm playing with 2511 terminal server and plugged a router and a firewall
on
> the async ports. But when I try to connect to the fire wall with 2001 I
get
> an error msg "% Connection refused by remote host", I can ping it and I
can
> telnet to it via cross-over cable!!??.
>
> Any device.
>
> Regards,
>
> Tarry
>
> --
> Sent through GMX FreeMail - http://www.gmx.net
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
