Hello,
Here is a senerio I'm playing with, possibly the answer is sub-interfaces,
but nonetheless... I have a cisco with a primary ethernet IP address, and
two secondary IP addresses. When I go to ping another router in one of the
subnets of one of the secondary IP addresses, it does so with the source
address of the primary address on the interface, so the other router tries
to send the response up its default. If the source address was the address
that was actually in the subnet it was pinging it returns ok. I tested
this with replacing the source address using extended pings. Any thoughts
on how to make it behave the way I want it to. Thanks.
Andy
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
