Is the following statement in your config? boot system flash
slot0:c7200-boot-mz.120-10.S.bin .I have seen that problem when the
statement is not in there.
regards,
Steve
-----Original Message-----
From: Roger Sohn [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, February 20, 2001 2:42 AM
To: [EMAIL PROTECTED]
Subject: Boot Problems on a 7200
I've tried searching massively through CCO and can't seem to find the
solution to this problem.
I have a Cisco 7206VXR and everytime I try to boot it up, everything is
dandy...but it always comes to the prompt of "Router(boot)". This is
the
output when I run a "show version". It says that the system is returned
to
ROM by reload. Is this tied in with the problem? I currently have it
set
to boot off the flash disk with the image of c7200-boot-mz.120-10.S. Am
I
missing something?
-Roger
---
Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-BOOT-M), Version 12.0(10)S, EARLY
DEPLOYMENT
RELEA
SE SOFTWARE (fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Fri 24-Mar-00 15:54 by htseng
Image text-base: 0x60008900, data-base: 0x60684000
ROM: System Bootstrap, Version 12.0(19990210:195103) [12.0XE 105],
DEVELOPMENT S
OFTWARE
California uptime is 4 minutes
System returned to ROM by reload
System image file is "disk0:c7200-boot-mz.120-10.S"
cisco 7206VXR (NPE300) processor with 57344K/40960K bytes of memory.
R7000 CPU at 262Mhz, Implementation 39, Rev 2.1, 256KB L2, 2048KB L3
Cache
6 slot VXR midplane, Version 2.0
Last reset from power-on
Bridging software.
X.25 software, Version 3.0.0.
3 FastEthernet/IEEE 802.3 interface(s)
8 Serial network interface(s)
Router(boot)#
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
