correct 1e2w,2e2w, 1fe, 1fe2w and 2fe2w do not work in the 2600 series.
Regards,
Jason Baker
Network Engineer
MCSE, CCNA
-----Original Message-----
From: Daniel Cotts [mailto:[EMAIL PROTECTED]]
Sent: Thursday, February 22, 2001 9:09 AM
To: 'Avila, James'; '[EMAIL PROTECTED]'
Subject: RE: 4 Ethernet Int
It will be the 3600 series.
2 10/100 Ethernet 2 WAN Card Slot Network Module NM-2FE2W= $3200
Two of these cards would fit in a 3620.
I can't find anything for the 2651. If one of the above cards would work in
it - that might be less expensive. Those cards are not listed for the 2600
series on the reseller pricing page.
> -----Original Message-----
> From: Avila, James [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, February 21, 2001 3:00 PM
> To: [EMAIL PROTECTED]
> Subject: 4 Ethernet Int
>
>
> New to the cisco world.
>
> Does anyone know what the smallest Cisco router I can place 4
> routable fast
> ethernet interfaces might be?
>
> TIA
>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct
> and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]