I don't believe Cisco makes a 4 port FE module for either the 2600 or 3600
series routers.
The 3640 could support 4 * 1 port FE modules.
----- Original Message -----
From: Jason Baker <[EMAIL PROTECTED]>
To: 'Michael Snyder' <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Wednesday, February 21, 2001 10:54 PM
Subject: RE: 4 Ethernet Int
> nope FE modules are not supported by the 2600 range...
>
> go ahead try it.
>
> It is to do with the architecture of the router.
>
> Regards,
>
> Jason Baker
> Network Engineer
> MCSE, CCNA
>
>
>
> -----Original Message-----
> From: Michael Snyder [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, February 22, 2001 11:45 AM
> To: [EMAIL PROTECTED]
> Subject: Re: 4 Ethernet Int
>
>
> How about a 2621 with two FE WIC's?
>
>
>
> ""Avila, James"" <[EMAIL PROTECTED]> wrote in message
> 32CC5B62AF0BD2119E4C00A0C9663E224378C7@MAIL">news:32CC5B62AF0BD2119E4C00A0C9663E224378C7@MAIL...
> > New to the cisco world.
> >
> > Does anyone know what the smallest Cisco router I can place 4 routable
> fast
> > ethernet interfaces might be?
> >
> > TIA
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]