I get the same results with HyperTerm, SecureCRT 3.2, Minicom from
Freebsd and tip from Solaris. I don't think the emulation program is the
problem. THen again I could be wrong.
"Jeff Duchin" <[EMAIL PROTECTED]> wrote in message
97u9bk$sg4$[EMAIL PROTECTED]">news:97u9bk$sg4$[EMAIL PROTECTED]...
> Try using the latest HyperTerminal.
>
> Jeff
>
> ""Marco Rodrigues"" <[EMAIL PROTECTED]> wrote in message
> 97sk88$fei$[EMAIL PROTECTED]">news:97sk88$fei$[EMAIL PROTECTED]...
> > Hello group,
> >
> > I recently got a hold of a Catalyst WS-C1924C-A. I want to begin the
> > process of upgrading it to Enterprise edition. Problem is I can't get a
> > console on the switch. My original problem was getting something on my
> > HyperTerm/SecureCRT/tips/minicom whatever. I use to get garbage
> characters.
> > From recent threads I read that I have to get a hold of a null modem
cable
> > which I have. Problem now is when I type something on the emulator I
> > actually see my characters being typed in but I get no output on the
> screen.
> > The terminal setting are fine (9600 8N1). Should I be rebooting the
> switch
> > and doing something before startup? I've tried holding down the mode
> button
> > as it starts up and nothing. The documentation doesn't seem to specify
> > anything specific so that's what I'm asking here.
> >
> > Thanks in advance!
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
