I am trying to telnet to a 2514 router from work. I have a Linksys BEFSR41
ethernet/dsl router on my incoming cable line. I have enabled port
forwarding for telnet (port 23) on this router. I have also set up vty on
the 2514. When I try to telnet to the wan interface of the Linksys forwarded
to the ethernet interface on the 2514 I get the message "Could not open a
connection to host: Connection failed". But if I remote access an NT server
inside my home net (on internal address space), from there I can telnet (on
the private address space) to the same ethernet interface and connect.
Since I can remote access my NT box, port forwarding on the Linksys router
is working. Also the 2514 should be set properly since I can telnet in from
within my lan. I must be overlooking something but I cannot figure it out.
I would appreciate any ideas or assistance.
TIA
Mark
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
