I currently am using a Linksys router. And it works fine, but the firewall
feature (if thats what you want to call it) blows. And it's not very
configurable, (you can only forward ports to one destination). So in a
better world, if I could get my dsl to work through my Cisco Router, I could
fool around with access-list's, Firewall feature set, NAT, PAT, etc...
-----Original Message-----
From: Glenn Johnson [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, March 06, 2001 3:58 PM
To: Rizzo Damian; 'Rahul Kachalia'; Timothy Metz; [EMAIL PROTECTED]
Subject: RE: DSL internet with PPPoE
Any reason (other than $) that a simple linksys (<$100) switch wouldn't
allow you to accomplish your goal?
Sample -
http://www.us.buy.com/retail/product.asp?loc=&sku=10249719&PageFormat=7#prod
uct
It has DHCP, NAT, IPSec/PPTP pass-through, forwarding, etc. All of this for
what seems like a bargain price.
I'm not affiliated with Linksys. A Netgear switch would probably be fine as
well.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Rizzo Damian
Sent: Tuesday, March 06, 2001 2:59 PM
To: 'Rahul Kachalia'; Timothy Metz; Rizzo Damian; [EMAIL PROTECTED]
Subject: RE: DSL internet with PPPoE
I don't see how any of this will provide me with what I desire. I desire to
plug my DSL modem directly into my router and use that router's address as
the gateway for my LAN. There's no reason that with only ONE registered IP
address that every PC in my LAN can't access the internet. There are many
solutions for this, I would probably use PAT on the router for instance. The
only thing that stands between me and my desire, is this friggin, useless,
does nothing but supply accounting info to the ISP, waste of bandwidth of a
protocol, PPPoE! Once you plug the Modem into the router, you somehow have
to authenticate to the ISP PPPoE server with a name and password. I have not
found a way to implement this yet. This make me mad!
Thanks for the ideas...
-----Original Message-----
From: Rahul Kachalia [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, March 06, 2001 2:48 PM
To: Timothy Metz; Rizzo Damian; [EMAIL PROTECTED]
Subject: Re: DSL internet with PPPoE
Tim, PPPoE fundamentals are pretty much similar to PPP over WAN links but
PPPoE breaks the boundary on router/modem & brings down to host level where
PPP is initiated just like a router but instead of serial links they send
PPP request over Ethernet frame which may add more Layer 2 frame as
configured on router/modem towards dslcloud.
If second PC need to connect to internet that PC too needs an internet
account & PPPoE software in order to access else first PC can be multihomed
& provide a gateway service to other host on LAN.
thanks
rahul.
----- Original Message -----
From: "Timothy Metz" <[EMAIL PROTECTED]>
To: "Rahul Kachalia" <[EMAIL PROTECTED]>; "Rizzo Damian"
<[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Tuesday, March 06, 2001 11:34 AM
Subject: RE: DSL internet with PPPoE
> Yes, I think this would work but I don't see how a second PC could get
> access to the internet unless it used the PC that initiated the connection
> through the DSL modem as a gateway.
>
> Tim
>
> > -----Original Message-----
> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> > Rahul Kachalia
> > Sent: Tuesday, March 06, 2001 7:39 PM
> > To: Rizzo Damian; [EMAIL PROTECTED]
> > Subject: Re: DSL internet with PPPoE
> >
> >
> > Rizzo,
> >
> > I think its possible, following would be your topology
> >
> > LAN-----switch-----Ciscorouter-----eth-----dsl modem----------dsl cloud
> > ( make sure you have to turn ON bridging
on
> > both
> > ethernet interface of router )
> >
> > I am assuming you are using PPPoE client software on the PC. PPPoE send
> > Ethernet broadcast which needs to reach to PPPoE server unless
> > you dont turn
> > bridging on at routers traffic wont pass & it will fail.
> >
> > thanks
> > rahul.
> >
> >
> >
> >
> > ----- Original Message -----
> > From: "Rizzo Damian" <[EMAIL PROTECTED]>
> > To: <[EMAIL PROTECTED]>
> > Sent: Tuesday, March 06, 2001 7:22 AM
> > Subject: DSL internet with PPPoE
> >
> >
> > > I have a home lab with a few routers and switches, I have a
> > permanent DSL
> > > connection but unfortunately they use PPPoE for authentication. Is
there
> > any
> > > way possible I can use this connection with a Cisco Router???
> > I'd like to
> > > plug the modem into my router and then route traffic from
> > there. But can't
> > > seem to get past the PPPoE problem. Thanks for the help.
> > >
> > >
> > >
> > >
> > >
> > >
> > > Damian Rizzo
> > > Senior IT Engineer
> > > Marakon Associates
> > > 203-978-6341
> > > [EMAIL PROTECTED]
> > >
> > > _________________________________
> > > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]