Rizzo,
Check this link
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121relnt/160
0/rn1600xg.htm
but thats for 1605, cisco may comeout for their other 1600 series.
thanks
rahul.
----- Original Message -----
From: "Rizzo Damian" <[EMAIL PROTECTED]>
To: "'Rahul Kachalia'" <[EMAIL PROTECTED]>; "Rizzo Damian"
<[EMAIL PROTECTED]>; "Timothy Metz" <[EMAIL PROTECTED]>;
<[EMAIL PROTECTED]>
Sent: Tuesday, March 06, 2001 12:34 PM
Subject: RE: DSL internet with PPPoE
> You are correct Rahul. In theory, I do want my Router to be the PPPoE
> client, and have the PC's in my LAN travel through it. I currently have a
> 1601 and a 1604 router.
>
>
>
>
> -----Original Message-----
> From: Rahul Kachalia [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, March 06, 2001 3:15 PM
> To: Rizzo Damian; Timothy Metz; [EMAIL PROTECTED]
> Subject: Re: DSL internet with PPPoE
>
>
> Rizzo,
>
> As I mentioned you earlier I just assumed your PC is PPPoE client,
from
> the following statement looks like you want router to be PPPoE client.
Could
> please tell which is this series of router?
>
> thanks
> rahul.
> ----- Original Message -----
> From: "Rizzo Damian" <[EMAIL PROTECTED]>
> To: "'Rahul Kachalia'" <[EMAIL PROTECTED]>; "Timothy Metz"
> <[EMAIL PROTECTED]>; "Rizzo Damian" <[EMAIL PROTECTED]>;
> <[EMAIL PROTECTED]>
> Sent: Tuesday, March 06, 2001 11:58 AM
> Subject: RE: DSL internet with PPPoE
>
>
> > I don't see how any of this will provide me with what I desire. I desire
> to
> > plug my DSL modem directly into my router and use that router's address
as
> > the gateway for my LAN. There's no reason that with only ONE registered
IP
> > address that every PC in my LAN can't access the internet. There are
many
> > solutions for this, I would probably use PAT on the router for instance.
> The
> > only thing that stands between me and my desire, is this friggin,
useless,
> > does nothing but supply accounting info to the ISP, waste of bandwidth
of
> a
> > protocol, PPPoE! Once you plug the Modem into the router, you somehow
have
> > to authenticate to the ISP PPPoE server with a name and password. I have
> not
> > found a way to implement this yet. This make me mad!
> >
> > Thanks for the ideas...
> >
> >
> >
> >
> >
> > -----Original Message-----
> > From: Rahul Kachalia [mailto:[EMAIL PROTECTED]]
> > Sent: Tuesday, March 06, 2001 2:48 PM
> > To: Timothy Metz; Rizzo Damian; [EMAIL PROTECTED]
> > Subject: Re: DSL internet with PPPoE
> >
> >
> > Tim, PPPoE fundamentals are pretty much similar to PPP over WAN links
but
> > PPPoE breaks the boundary on router/modem & brings down to host level
> where
> > PPP is initiated just like a router but instead of serial links they
send
> > PPP request over Ethernet frame which may add more Layer 2 frame as
> > configured on router/modem towards dslcloud.
> >
> > If second PC need to connect to internet that PC too needs an internet
> > account & PPPoE software in order to access else first PC can be
> multihomed
> > & provide a gateway service to other host on LAN.
> >
> > thanks
> > rahul.
> > ----- Original Message -----
> > From: "Timothy Metz" <[EMAIL PROTECTED]>
> > To: "Rahul Kachalia" <[EMAIL PROTECTED]>; "Rizzo Damian"
> > <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
> > Sent: Tuesday, March 06, 2001 11:34 AM
> > Subject: RE: DSL internet with PPPoE
> >
> >
> > > Yes, I think this would work but I don't see how a second PC could get
> > > access to the internet unless it used the PC that initiated the
> connection
> > > through the DSL modem as a gateway.
> > >
> > > Tim
> > >
> > > > -----Original Message-----
> > > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf
Of
> > > > Rahul Kachalia
> > > > Sent: Tuesday, March 06, 2001 7:39 PM
> > > > To: Rizzo Damian; [EMAIL PROTECTED]
> > > > Subject: Re: DSL internet with PPPoE
> > > >
> > > >
> > > > Rizzo,
> > > >
> > > > I think its possible, following would be your topology
> > > >
> > > > LAN-----switch-----Ciscorouter-----eth-----dsl modem----------dsl
> cloud
> > > > ( make sure you have to turn ON
> bridging
> > on
> > > > both
> > > > ethernet interface of router )
> > > >
> > > > I am assuming you are using PPPoE client software on the PC. PPPoE
> send
> > > > Ethernet broadcast which needs to reach to PPPoE server unless
> > > > you dont turn
> > > > bridging on at routers traffic wont pass & it will fail.
> > > >
> > > > thanks
> > > > rahul.
> > > >
> > > >
> > > >
> > > >
> > > > ----- Original Message -----
> > > > From: "Rizzo Damian" <[EMAIL PROTECTED]>
> > > > To: <[EMAIL PROTECTED]>
> > > > Sent: Tuesday, March 06, 2001 7:22 AM
> > > > Subject: DSL internet with PPPoE
> > > >
> > > >
> > > > > I have a home lab with a few routers and switches, I have a
> > > > permanent DSL
> > > > > connection but unfortunately they use PPPoE for authentication. Is
> > there
> > > > any
> > > > > way possible I can use this connection with a Cisco Router???
> > > > I'd like to
> > > > > plug the modem into my router and then route traffic from
> > > > there. But can't
> > > > > seem to get past the PPPoE problem. Thanks for the help.
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Damian Rizzo
> > > > > Senior IT Engineer
> > > > > Marakon Associates
> > > > > 203-978-6341
> > > > > [EMAIL PROTECTED]
> > > > >
> > > > > _________________________________
> > > > > FAQ, list archives, and subscription info:
> > > > http://www.groupstudy.com/list/cisco.html
> > > > > Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
> > > > >
> > > >
> > > > _________________________________
> > > > FAQ, list archives, and subscription info:
> > > > http://www.groupstudy.com/list/cisco.html
> > > > Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
> > >
> > >
> >
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]