A 2600 can be upgraded while on line. The router copies the image to the
flash, but the systems runs on memory. On a reload the new software is
activated
A 2500 will go into a "boot mode" to receive the flash file. when you enter
copy tftp flash, the router restarts and enter this mode, then copies the
flash and only then reboots again
-----Original Message-----
From: Jason Baker [mailto:[EMAIL PROTECTED]]
Sent: 07 March 2001 03:07
To: 'Thomas'; [EMAIL PROTECTED]
Subject: RE: How to upgrade IOS remotely?
setup up a Tftp server on your network. Copy the ios from the tftp server
adn then simply reload.
Regards,
Jason Baker
Network Engineer
-----Original Message-----
From: Thomas [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, March 07, 2001 11:40 AM
To: [EMAIL PROTECTED]
Subject: How to upgrade IOS remotely?
Hi Group - I have couple of 2600 and 2500 routers in production. I wonder
if there is a way to upgrade the IOS for these router remotely (or through
the modem...)? I know that I cannot upgrade the IOS when I am running on
the running-config.... Thanks in advance!
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
