assuming you did not modify your config resgister it will boot up
with the new IOS. your startup config will boot so before you do the reload
make sure your copy your running config over the start up config (copy run
start)
-----Original Message-----
From: Thomas [mailto:[EMAIL PROTECTED]]
Sent: Thursday, March 08, 2001 3:19 PM
To: [EMAIL PROTECTED]
Subject: Re: How to upgrade IOS remotely?
You said the 2600 can be upgraded online. That means I can issue the
command "copy tftp flash" while it is running on running mode? What will
happend after I reload the router? will the new IOS version still have the
same IP address for all the interface as configured with the old IOS? If
all the old configuration is erased, I will absolutely lose connection to
the router I think....
"Andrew Larkins" <[EMAIL PROTECTED]> wrote in message
8F5F72F80EF5D311ADE600A0C9DCF8620112B968@UBDCCOMJHBEX">news:8F5F72F80EF5D311ADE600A0C9DCF8620112B968@UBDCCOMJHBEX...
> A 2600 can be upgraded while on line. The router copies the image to the
> flash, but the systems runs on memory. On a reload the new software is
> activated
> A 2500 will go into a "boot mode" to receive the flash file. when you
enter
> copy tftp flash, the router restarts and enter this mode, then copies the
> flash and only then reboots again
>
> -----Original Message-----
> From: Jason Baker [mailto:[EMAIL PROTECTED]]
> Sent: 07 March 2001 03:07
> To: 'Thomas'; [EMAIL PROTECTED]
> Subject: RE: How to upgrade IOS remotely?
>
>
> setup up a Tftp server on your network. Copy the ios from the tftp server
> adn then simply reload.
>
> Regards,
>
> Jason Baker
> Network Engineer
>
>
>
>
>
>
>
> -----Original Message-----
> From: Thomas [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, March 07, 2001 11:40 AM
> To: [EMAIL PROTECTED]
> Subject: How to upgrade IOS remotely?
>
>
> Hi Group - I have couple of 2600 and 2500 routers in production. I wonder
> if there is a way to upgrade the IOS for these router remotely (or through
> the modem...)? I know that I cannot upgrade the IOS when I am running on
> the running-config.... Thanks in advance!
>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
