How do i reset the config? When the router comes up I can't read anything
it comes up all jibber'ish. I can't read anything..Its all heiroglyphics. So
If i cant read the screen, how in the hell is password recovery going to do
me anygood? Once again let me say this: I can't even read the screen. Where
the System boot info usually comes up, I get all capital C's across the
screen. I'm sure that it is something with the config reg. I just don't know
how to fix it...
I was doing the password recovery to begin with ( setting the 0x2102 on a
2502). It was on the reboot that all the CCC's starting coming up. Once
again that is all that is on my hyperterm screen all CCC's.
Thanks for any help you can give...Mr supino has given the best advice, i
just don't have a lo
"Chris Supino" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Have you tried just resetting the config reg back to the proper setting?
> This information is on CCO.
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> The.Rock
> Sent: Sunday, March 11, 2001 12:08 PM
> To: [EMAIL PROTECTED]
> Subject: Re: Have a problem
>
>
> I was trying to do the password recovery where you change the config
> register. I figure i typed something in wrong. You think that replacing
the
> boot chips would work? I had planned on doing this anyway. Especially if
> this fixes the problem....
>
> "John Neiberger" <[EMAIL PROTECTED]> wrote in message
> 28995509.984329759512.JavaMail.imail@slippery">news:28995509.984329759512.JavaMail.imail@slippery...
> > It looks like you might have changed the console port baud rate. At
least
> I
> > think that's possible with the config register. I just woke up and I'm
a
> > little sluggish. <g>
> >
> > Anyway, try changing the connection speed in your terminal software to
> other
> > settings to see if something else works.
> >
> > Good luck!
> >
> > John
> >
> > > I was trying to reset a password on router and i guess I fat fingered
> the
> > > entry and mistyped the entry for the configuration register. Now all
i
> > get
> > > is a bunch of " CCC's" on boot up. Does anyone know how I can fix
this?
> > >
> > >
> > > _________________________________
> > > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
> >
> >
> >
> >
> >
> > _______________________________________________________
> > Send a cool gift with your E-Card
> > http://www.bluemountain.com/giftcenter/
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
