It depends on the version you're using: some versions you can only issue the
conduit commands, new versions 5.X you can do both conduits and
static/access-lists commands.
Let me know which version you're using.
Nabil
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Muhammad Faheem
Sent: Tuesday, March 13, 2001 12:57 PM
To: cisco@groupstudy. com (E-mail)
Subject: How to Open Pix firewall Ports
Hi Guys
I want to open port 3050 and 3051 on Pix firewall , i would appreciate if
any body Guide me how to get this done or what command should i check.
Regards
Muhammad Faheem
Systems Engineer
Afcomp
Hello : (9714)-3933878 / 3027338
Fax : (9714)-3933832
Web : www.afcomp.com
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
