Quick question for the group. I have an AS5300 that i thought i had setup
for two radius servers, however we had a situation where the primary
radius server went down and the 5300 did not switch to use the secondary.
I had to remove the primary in order for the secondary to work.
Here is what i had configured:
radius-server host x.x.x.x auth-port 1812 acct-port 1813 non-standard
radius-server host x.x.x.x auth-port 1812 acct-port 1813 non-standard
Thanks
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
