I think it is just the matter of having...
aaa authentication ppp default group radius
in the config. It supposedly uses the list of radius servers configured.
Adam Hickey
[EMAIL PROTECTED]
CCNA CCNP (in progress)
_____________________________
"And One!"
----- Original Message -----
From: "Dale Frohman" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, March 15, 2001 7:25 AM
Subject: AS5300 radius
> Quick question for the group. I have an AS5300 that i thought i had setup
> for two radius servers, however we had a situation where the primary
> radius server went down and the 5300 did not switch to use the secondary.
> I had to remove the primary in order for the secondary to work.
>
> Here is what i had configured:
>
> radius-server host x.x.x.x auth-port 1812 acct-port 1813 non-standard
> radius-server host x.x.x.x auth-port 1812 acct-port 1813 non-standard
>
> Thanks
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
