That's very cool Tom thx for the info.
Jim
"Tom Keough" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi Thomas,
> Do a debug frame-relay lmi (usual Cisco precaution disclaimer here) and
every 6th
> exchange the switch will send the CIR in it's reply...
> HTH,
> Tom
>
> --
> Tom Keough CCNP MCSE
> AT&T Global Network Solutions
> Standard Access Management
> Managed Router Service
> Tier 2 Technical Support
> Tampa, Florida
> Thomas wrote:
>
> > Hi All - I know that we can set the bandwidth on an interface; However,
is
> > there a way to check what the real rate of a frame circuit a router
> > interface (CIR). Which command should I type? Thanks!
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
