I disagree, at least based on my last experiences at this. CIR can
sometimes but not always be shown. Not sure if it is a function of IOS,
telco, LMI type or what, but this is not always true.
Brian
On Thu, 15 Mar 2001, Nhan Nguyen wrote:
> show frame map or show frame pvc will do it.
>
>
> >From: "Brian" <[EMAIL PROTECTED]>
> >Reply-To: "Brian" <[EMAIL PROTECTED]>
> >To: [EMAIL PROTECTED]
> >Subject: Re: How to check the real rate of the frame relay circuit?
> >Date: Wed, 14 Mar 2001 16:53:16 -0800
> >
> >Cir is controlled by telco, you can do a show interface to see an average
> >of
> >the last few minutes, or gather snmp data to look at your usage.
> >Typically,
> >the cir is 1/2 to 3/4 of the purchased rate from the ISP. I often saw 56k
> >frame circuits with a 3xxxx CIR. Also, more CIR can cost more money.
> >
> > Bri
> >"Thomas" <[EMAIL PROTECTED]> wrote in message
> >98p731$926$[EMAIL PROTECTED]">news:98p731$926$[EMAIL PROTECTED]...
> > > Hi All - I know that we can set the bandwidth on an interface; However,
> >is
> > > there a way to check what the real rate of a frame circuit a router
> > > interface (CIR). Which command should I type? Thanks!
> > >
> > >
> > > _________________________________
> > > FAQ, list archives, and subscription info:
> >http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > >
> >
> >
> >_________________________________
> >FAQ, list archives, and subscription info:
> >http://www.groupstudy.com/list/cisco.html
> >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
