I am sure I use right password and username, cause I am able to connect to
ISP by using modem with the same username and password.
""David A. Lauer"" <[EMAIL PROTECTED]> wrote in message
001a01c0ae14$dba2ea80$0401000a@DALLAPTOP1">news:001a01c0ae14$dba2ea80$0401000a@DALLAPTOP1...
>
> looks like you might be missing the username and password, needed on both
> sides for authentication.
>
> username 'name' password 'secret'
>
> The username is case sensitive and must match the opposite router's
> hostname. The password is also case sensitive and must match the password
> set in the opposite router's corresponding username definition.
>
> Dal
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Indy
> Sent: Friday, March 16, 2001 4:07 AM
> To: [EMAIL PROTECTED]
> Subject: Re: Need help configuring DDR on 805
>
>
> This is the config I figure by using fast step software combined with CLI
> from cisco homepage. I might do some testing tommorow.
>
> version 12.0
> no service pad
> service timestamps debug uptime
> service timestamps log uptime
> service password-encryption
> !
> hostname cisco805
> !
> logging buffered 10240 debugging
> enable secret 5 ????
> !
> ip subnet-zero
> no ip source-route
> !
> chat-script dial ABORT ERROR "" "AT Z" OK "ATDT \T" TIMEOUT 60 CONNECT \c
> !
> !
> process-max-time 200
> !
> interface Ethernet0
> ip address 192.168.2.1 255.255.255.0
> ip access-group 121 in
> no ip directed-broadcast
> no ip proxy-arp
> ip nat inside
> !
> interface Serial0
> physical-layer async
> no ip address
> no ip directed-broadcast
> encapsulation ppp
> dialer in-band
> dialer pool-member 7
> async mode dedicated
> no fair-queue
> ppp authentication chap pap callin
> !
> interface Dialer1
> ip address negotiated
> no ip directed-broadcast
> encapsulation ppp
> dialer remote-name dnet
> dialer idle-timeout 300
> dialer string 21,5550019 modem-script dial
> dialer pool 7
> dialer-group 7
> no cdp enable
> ppp authentication chap pap callin
> ppp pap sent-username udin password 7 ******
> !
> ip nat inside source list 18 interface Serial0 overload
> no ip http server
> ip classless
> ip route 0.0.0.0 0.0.0.0 Dialer1
> !
> access-list 18 permit 192.168.2.0 0.0.0.255
> access-list 121 deny udp any eq netbios-dgm any
> access-list 121 deny udp any eq netbios-ns any
> access-list 121 deny udp any eq netbios-ss any
> access-list 121 deny tcp any eq 137 any
> access-list 121 deny tcp any eq 138 any
> access-list 121 deny tcp any eq 139 any
> access-list 121 permit ip any any
> dialer-list 7 protocol ip permit
> !
> line con 0
> exec-timeout 0 0
> transport input none
> stopbits 1
> line 1
> modem InOut
> transport input all
> stopbits 1
> speed 33600
> flowcontrol hardware
> line vty 0 4
> exec-timeout 0 0
> login local
> !
> end
>
> "Piatnitchi Cristian" <[EMAIL PROTECTED]> wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Try this it works on 1600 . I think is better to send us
> > the config that you are using.
> >
> > Cristian
> >
> >
> > !
> > version 11.3
> > service timestamps debug uptime
> > service timestamps log uptime
> > no service password-encryption
> > !
> > hostname C1600
> > !
> > enable secret 5 //////
> > enable password ??????
> > !
> > chat-script dial ABORT ERROR "" "AT Z" OK "ATDP \T" TIMEOUT 50 CONNECT
> > !
> > !
> > !
> > interface Ethernet0
> > ip address 172.199.1.5 255.255.255.0
> > !
> > interface Serial0
> > physical-layer async
> > ip address negotiated
> > encapsulation ppp
> > dialer in-band
> > dialer string 9,2331417
> > dialer-group 1
> > async mode interactive
> > no peer default ip address
> > no cdp enable
> > ppp chap refuse
> > ppp pap sent-username test password 7 ?????????
> > !
> >
> > ip classless
> > ip route 0.0.0.0 0.0.0.0 Serial0
> > !
> > dialer-list 1 protocol ip permit
> > dialer-list 1 protocol ipx permit
> > !
> > line con 0
> > line 1
> > autoselect ppp
> > script dialer dial
> > login
> > modem InOut
> > modem autoconfigure discovery
> > transport input all
> > stopbits 1
> > speed 115200
> > flowcontrol hardware
> >
> >
> > line vty 0 4
> > password telnet
> > login
> > !
> > end
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
