ummm Shahid, what's the status of that 4th interface? Up/down? down/down?
did you use subinterfaces on the hub router, or a frame-relay map statement?
(sounds like subinterfaces to me)
or are you checking the interface status on the 7000?
If you post the "show ip interfaces brief" for all 4 routers, that would
help. Posting the config of the "problem router" would also help.
-e-
----- Original Message -----
From: Shahid Muhammad Shafi <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, March 19, 2001 4:13 PM
Subject: Guys, Help me urgently
> Dear forum
> I am setting up a lab for frame relay switching using
> the secenario such that I have one 7000 router acting
> as fr switch and three routers such as one is acting
> as Hub and two are acting as spokes. The interface
> serial1/1 of 7000 is connected to the hub so i have
> two routes statement there
>
> like
>
> frame-relay route 100 interface serial1/0 100
> frame-relay route 200 interface serial1/2 200
>
> on interface serial1/0
> frame-relay route 100 interface serial1/1 100
>
> on interface serial1/2
> frame-relay route 200 interface serial1/1 200
>
> i am getting only three actives and not one.
>
> Checked all the cabling, still not working
>
> Kindly help me out
>
> Regards
> Shahid
>
>
>
> =====
> Shahid Muhammad Shafi
> MSc Telecommunications Candidate
> University of Colorado Boulder
> BSEE(GIKI),MCSE+I,CNA,CCNA,CCNP
>
> Please help feed hungry people worldwide http://www.hungersite.com/
> A small thing each of us can do to help others less fortunate than
ourselves
>
> __________________________________________________
> Do You Yahoo!?
> Get email at your own domain with Yahoo! Mail.
> http://personal.mail.yahoo.com/
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
