sorry misread your question.. . having a headache...
it'll run only 10BASE-T if reuse token cables.
it's better to upgrade to at least CAT5 ..
http://www.networking.ibm.com/trl/trl0c01.html
do you have any token ring equipments you like to sell after the
migration???
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Berger
Sent: Wednesday, March 21, 2001 5:56 PM
To: Cisco Mailing list
Subject: RE: Token Ring to Ethernet
Cat5 cables should work perfect in token ring enviroment....
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Raphael Kruczkowski
Sent: Wednesday, March 21, 2001 5:22 PM
To: Cisco (E-mail)
Subject: Token Ring to Ethernet
Hello,
I have a site that is running Token-Ring Type 1 cables. They want to
cut the ends and put RJ-45 and run Ethernet on the cables. Can this be
done, or will their be problems? Do we need anything like media
converters?
Thank You.
Raphael
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
