oops, the first sentance got cut off of my last post. should have read...
I agree with you about the issues. I wasn't ever asking a question about
how the technologies worked, just whether anyone had heard or seen of such a
device. Again, I am not saying it would make sense, just asking whether it
exists.
Neil Schneider <[EMAIL PROTECTED]> wrote in message
AF134B55E3C8D111B56B0020AFE9717587A471@MAIL">news:AF134B55E3C8D111B56B0020AFE9717587A471@MAIL...
> how the technologies worked, just whether anyone had heard or seen of such
a
> device. Again, I am not saying it would make sense, just whether it
> exists.
>
> Neil
>
>
>
> -----Original Message-----
> From: John Neiberger
> To: [EMAIL PROTECTED]
> Cc: [EMAIL PROTECTED]
> Sent: 3/22/01 11:28 AM
> Subject: Re: RJ45 ethernet to cisco Serial conversion?
>
> There are two separate issues that need to be dealt with to accomplish
> your goal. First you need to deal with the physical issue, which in a
> way is what that bridging device does for you. It allows you to place
> ethernet data onto a WAN link, but it also requires the same device to
> be on the other end of the link to convert this serialized-ethernet to
> standard ethernet. This is just bridging, not true media conversion.
>
> There are yet other physical issues like clocking and encoding. A
> synchronous serial link places bits on the wire in a way that would be
> completely incomprehensible to an ethernet speaker and vice versa. To
> handle the clocking issue you certainly would need a device that can
> provide clocking for the serial port, which that bridging unit does.
>
> The second issue is the datalink encapsulation. In ethernet, you're
> using Ethernet v2 or 802.3 frames as your encapsulation, whereas the
> serial link is using either HDLC, PPP, or frame relay. Again, these are
> so much different than ethernet that it requires some intelligence to
> convert between them.
>
> This is why a router is necessary and no simple converter can handle
> it. A two-port router would be needed to successfully accomplish this
> task. I think that is why Priscilla pointed you to that link. Instead
> of answering the question outright, she pointed you to material
> that--upon digestion--would lead to the answer.
>
> HTH,
> John
>
> >>> "Neil Schneider" <[EMAIL PROTECTED]> 3/22/01 9:06:57
> AM >>>
> Priscilla,
>
> I usually look forward to your posts, but I think you are way off base
> with
> this response. Pointing to the cisco page describing different
> technologies
> does absolutely nothing to answer my original question. I also relize
> that
> a converter/transiever such as this would have limited use in a real
> world
> situation, but that certainly does not mean it doesnt exist.
> Obvoiusly we can move data between ethernet and serial, that is what
> is
> being done in the router itself, so your train/bus senario is
> meaningless.
> What I was looking for was an external device that can do this without
> resorting to using another router such as -->>
>
> ethernet -->routerA rj45 ----routerA serial --->routerB serial
> ----routerB
> rj45--->ethernet
>
> I want to do:
>
> ehternet ---> external converter ---->routerA serial---routerA
> rj45 --->ethernet
>
> Neil Schneider
>
>
>
>
> Priscilla Oppenheimer <[EMAIL PROTECTED]> wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > The question doesn't even make sense. It would be like asking "what
> could
> I
> > use to convert a train station to a bus station?"
> >
> > Read the document.
> >
> > http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito_doc/index.htm
> >
> > Priscilla
> >
> > At 10:19 AM 3/22/01, you wrote:
> > >whoever comes up with the converter will be rich...
> > >
> > >-----Original Message-----
> > >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf
> Of
> > >Priscilla Oppenheimer
> > >Sent: Thursday, March 22, 2001 9:29 AM
> > >To: [EMAIL PROTECTED]
> > >Subject: RE: RJ45 ethernet to cisco Serial conversion?
> > >
> > >
> > >At 12:27 AM 3/22/01, Lim Jit Cheng wrote:
> > > >it's not all gone...... there is such converter....
> > > >
> > > >http://www.lanode.com/tier2/et10.htm
> > >
> > >That's not a converter. It's a bridge.
> > >
> > >Here's a good document to help you and the person who asked the
> original
> > >question:
> > >
> > >http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito_doc/index.htm
> > >
> > >Priscilla
> > >
> > >
> > >
> > >
> > > >i wonder how much is the price.. i am interested too.....
> > > >
> > > >
> > > >-----Original Message-----
> > > >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
> Behalf Of
> > > >John Neiberger
> > > >Sent: Wednesday, March 21, 2001 11:51 PM
> > > >To: [EMAIL PROTECTED]
> > > >Cc: [EMAIL PROTECTED]
> > > >Subject: Re: RJ45 ethernet to cisco Serial conversion?
> > > >
> > > >
> > > >There is no way to connect an ethernet interface to a serial
> interface,
> > > >they are entirely different technologies. Your only option would
> be to
> > > >add another router to do the media conversion.
> > > >
> > > >Or, you could buy a hub/switch and use that to connect the dsl
> router,
> > > >the lan, and your 2501. However, that's not the greatest solution
> and
> > > >it doesn't really accomplish your goal.
> > > >
> > > >HTH,
> > > >John
> > > >
> > > > >>> "Neil Schneider" <[EMAIL PROTECTED]> 3/21/01
> 8:28:06
> > > >AM >>>
> > > >I want to be able to plug my DSL modem into the serial port on my
> > > >2501,
> > > >leaving the ethernet port available for my lan. Does anyone know
> of a
> > > >converter/transiever that will allow me to do this?
> > > >Thanks in advance.
> > > >
> > > >Neil
> > > >
> > > >
> > > >_________________________________
> > > >FAQ, list archives, and subscription info:
> > > >http://www.groupstudy.com/list/cisco.html
> > > >Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
> > > >
> > > >
> > > >
> > > >_________________________________
> > > >FAQ, list archives, and subscription info:
> > > >http://www.groupstudy.com/list/cisco.html
> > > >Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
> > > >
> > > >_________________________________
> > > >FAQ, list archives, and subscription info:
> > > >http://www.groupstudy.com/list/cisco.html
> > > >Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
> > >
> > >
> > >________________________
> > >
> > >Priscilla Oppenheimer
> > >http://www.priscilla.com
> > >
> > >_________________________________
> > >FAQ, list archives, and subscription info:
> > >http://www.groupstudy.com/list/cisco.html
> > >Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
> >
> >
> > ________________________
> >
> > Priscilla Oppenheimer
> > http://www.priscilla.com
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
> >
>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
