The digital modems in the 36x0 can
-----Original Message-----
From: Holger Eichhorn [mailto:[EMAIL PROTECTED]]
Sent: maandag 26 maart 2001 14:17
To: [EMAIL PROTECTED]; Ryan O'Connell
Subject: Re: (Euro-)ISDN->Cisco1750->Modem
Ryan O'Connell wrote:
> On Mon, Mar 26, 2001 at 01:29:30PM +0200, Holger Eichhorn wrote:
> > I have an (Euro-)ISDN-line. In basics the router can't handle analogue
callins on an
> > ISDN-line.
> > My idea was:
> > 1. Analogue callin goes to the BRI-Interface
> > 2. BRI send it to the WIC-Interface
> > 3. The modem is mounted on WIC and on AUX
> > => the callin goes from WIC through the modem into the AUX
> > 4. The result is: I have an analogue call on the AUX-Port. To configure
an analogue
> > callin on AUX-Port is not a problem.
> > I don't know is it possible.
>
> No, this isn't possible.
>
You know other ways to connect analogue callins through ISDN-lines ?
--
Holger Eichhorn
IT Administration
CSK - Computer Services Kaisha (Deutschland) GmbH
http://www.csksoftware.com
[EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
