Erwin Vollering wrote:

> The digital modems in the 36x0 can
>
>

:-)
I know that. We use it in our company with a C3660 (PRI-Interface and digi-modems).
I mean a way with my equipment: C1750, BRI, AUX, WIC, Modem, Serial-Interface
Like LEGO: What can we do with this stones ? A wall, a train, a car, all what we want.

Best regards, Holger.


> -----Original Message-----
> From: Holger Eichhorn [mailto:[EMAIL PROTECTED]]
> Sent: maandag 26 maart 2001 14:17
> To: [EMAIL PROTECTED]; Ryan O'Connell
> Subject: Re: (Euro-)ISDN->Cisco1750->Modem
>
> Ryan O'Connell wrote:
>
> > On Mon, Mar 26, 2001 at 01:29:30PM +0200, Holger Eichhorn wrote:
> > > I have an (Euro-)ISDN-line. In basics the router can't handle analogue
> callins on an
> > > ISDN-line.
> > > My idea was:
> > > 1. Analogue callin goes to the BRI-Interface
> > > 2. BRI send it to the WIC-Interface
> > > 3. The modem is mounted on WIC and on AUX
> > > => the callin goes from WIC through the modem into the AUX
> > > 4. The result is: I have an analogue call on the AUX-Port. To configure
> an analogue
> > > callin on AUX-Port is not a problem.
> > > I don't know is it possible.
> >
> > No, this isn't possible.
> >
>
> You know other ways to connect analogue callins through ISDN-lines ?
>
> --
> Holger Eichhorn
> IT Administration
> CSK - Computer Services Kaisha (Deutschland) GmbH
> http://www.csksoftware.com
> [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

--
Holger Eichhorn
IT Administration
CSK - Computer Services Kaisha (Deutschland) GmbH
http://www.csksoftware.com
[EMAIL PROTECTED]


_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to