Paul,
I understand this.... but sadly in this case I do not have a choice.... as
I am 'borrowing'
some IP addressing from one of the subnets at one of our offices on our
WAN...
I think eventually they will run a 1 meg circuit from the WAN into the
remote office...
there are only six users at this remote office now...
Regards, Peter.
Paul Began <[EMAIL PROTECTED]> on 27/03/2001 12:03:07
To: [EMAIL PROTECTED]
cc:
Subject: RE: Cisco 800 Configuration
Bridging over isdn will always be connected. The average LAN has many
broadcasts per second. All broadcasts cross bridges. As a rule never bridge
over ISDN if you don't want the line up 24hours a day.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: 27 March 2001 11:19
To: [EMAIL PROTECTED]
Subject: Cisco 800 Configuration
Hi All !!
I need some help and advice if you have a moment......
I am going to use two Cisco 800 routers to bridge via an ISDN BRI line
between two offices.
I have configured the routers to do this using some configs which I apapted
from the cisco
site..... it works reasonably well..... thing is the routers tend to keep a
channel up constantly
even when no traffic is being sent......
When I first power up the routers channel 1 will be activated and it will
stay like this until
I send some traffic.... when traffic is sent channel 1 is dropped briefly
and then channels 1
and 2 are brought up..... I experience about a 15 second delay in bringing
up the connection
initially and then its fine.....
I want to try to keep costs down while this temporary solution is in
place.... can anyone tell me
is there is any refinements I can make to the configs below ??
Kind Regards, Peter.
----------------------------------------------------------------------------
------------------------------------------------------------
Current configuration:
!
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname dubtest
!
enable password cisco
!
username remotertr password 0 secret
!
!
!
!
!
!
ip subnet-zero
no ip routing
!
isdn switch-type basic-net3
!
!
!
interface Ethernet0
ip address 129.212.156.21 255.255.255.0
no ip route-cache
bridge-group 1
!
interface BRI0
description ISDN to remote router
ip address 129.212.156.21 255.255.255.0
encapsulation ppp
no ip route-cache
dialer idle-timeout 99999
dialer map bridge name remotertr broadcast 807XXXX
dialer hold-queue 75
dialer load-threshold 2 outbound
dialer-group 1
isdn switch-type basic-net3
ppp authentication chap
no ppp chap wait
ppp multilink
bridge-group 1
bridge-group 1 priority 2
!
no ip http server
ip classless
!
dialer-list 1 protocol bridge permit
bridge 1 protocol ieee
bridge 1 priority 1
!
line con 0
transport input none
stopbits 1
line vty 0 4
password cisco
login
!
no rcapi server
!
!
end
----------------------------------------------------------------------------
-------------------------------------------------------------------
Current configuration:
!
version 12.0
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname remotertr
!
enable password cisco
!
username dubtest password 0 secret
!
!
!
!
!
ip subnet-zero
no ip routing
!
isdn switch-type basic-net3
!
!
process-max-time 200
!
interface Ethernet0
ip address 129.212.156.22 255.255.255.0
ip directed-broadcast
no ip route-cache
bridge-group 1
!
interface BRI0
description ISDN line to dubtest
ip address 129.212.156.22 255.255.255.0
no ip directed-broadcast
encapsulation ppp
no ip route-cache
dialer idle-timeout 99999
dialer map bridge name dubtest broadcast 813XXXX
dialer hold-queue 75
dialer load-threshold 1 outbound
dialer-group 1
isdn switch-type basic-net3
ppp authentication chap callin
ppp multilink
bridge-group 1
bridge-group 1 priority 10
!
no ip http server
ip classless
!
dialer-list 1 protocol bridge permit
bridge 1 protocol ieee
bridge 1 priority 10
!
line con 0
transport input none
stopbits 1
line vty 0 4
login
!
end
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]